DIY STUDIO LIGHT OUT OF                                         CARDBOARD


                                Hey guys I'm here to help you making the right DIY studio light out of scratch. Here I'm using the cardboard box of the pressure cooker. You can use any type of cardboard. I cut the cardboard in a rectangle size for my convenience. Then I stick the awesome white color LED strip light which I have ordered from Amazon link to buy the light strip is given below check it out that. 



             https://amzn.to/2E6r52p






                    Then I patiently cut the LED strip to the actual size of the cardboard. Then I stick the light strip  in four rows. Then I soldered the four rows light strip in parallel. After that  I attached a switch at the bottom of the cardboard in series with the LED strip. Then I attached the female DC TO DC socket in the cardboard to power the LED strip from the 12V DC adaptor. 






The link for buying the DC to DC socket is given below.
                        

                                                                                     https://amzn.to/2PWiC4k

            After connecting all the components I powered it up with the 12V DC adaptor which provides an output of 12V and 1A of current which is sufficient to energize the studio light 

Note: 

                    If you want more number of leds and more brightness you can increase the length and width of the cardboard and increasing the number of led strip light rows will increase the brightness anyway it also increases the power consumption. For that high current DC adaptors is recommended. For example 12V 5A. 



If you have any doubts please ask me in the comment section. 
If you found this article useful then share it with your friends.